Action Tablet Pad Product Tool | How to flash ATM7130 G-Tab China Phone

Action Tablet Pad Product Tool

Action Pad Product Tool | How to flash ATM7130 G-Tab China Phone

Action Tablet product tool could be a flasher tool which supports the ATM chipset ic's processor most fount on Tablet devices, just like the other tool, This tool can upgrade/download the Firmware Rom to devices via USB connection using your PC or laptop.

The Action Tablet product tool link to devices with ATM chipset like the figure below which offers connection driver provide this type of chipset computer circuit. the motive force called (Windows OS)adfuWinUsb,inf, The boot mode driver to link the ATM chipset devices to Action Tablet product tool to begin working download the ROM to devices

How to find Model number of Action Products

This is the sample of ATM computer circuit processor inside a device that support this tool.

The Firmware file is analogous to scatter base system but not totally same extension or built-in one file, the firmware that may be used is a sample (.img file).

Action Tablet Pad Product Tool

ATM7031B_K88_v1.8.fw

image.md5

misc.img

recovery.img

system.img

The ATM7031B_K88_v1.8.fw is that the identity loader of ATM devices which partition will make it while flashing part the misc.img, recovery.img, and system.img.

The image.md5 is that a part of the firmware that identity of a model or what the application will install.

The basic step using this tool and step by step the way to flash the device using a PC Windows operating system below

Open the MainApp.exe

Click the color green reload icon

The pop-up appears about browsing the FW Firmware file (ex. ATM7031B_K88_v1.8

Afterload the FW the tool asking to switch this FW choose it and replace

Action Tablet Pad Product Tool

After this replacing your FW which you would like to flash to your device, the tools load the partition of the image ROM file and manually browse the misc.img, recovery.img, and system.img.

Connect (BOOT MODE) the Tablet or device to the USB port of PC /laptop in power off while hold volume UP/DOWN button ( make sure you have got Driver installed to your PC, if not this tool does not detect the device)

When the device is connected to PC via BOOT MODE  in window log the number of connected devices.

When the device is detected the DOWNLOAD ICON button highlight is prepared to click and start to begin flashing.

You can wait until finish 100% flash and disconnect the device from USB and check if your work if successful.

WATCH VIDEO ACTUAL FLASHING of Action Product Tool ATM chipset flasher tool below.

 

Mirror / Mirror  

How to flash ATM7130 G-Tab China Phone